HEAVY MANUAL BENDING MACHINE M-BH1
WHO IS IT FOR?
URSUS™ is a bending machine for roofers who require maximum strength and reliability from the machine – for those who primarily care about unrivalled precision.
The only bending machine with undercuts on the edges of the upper beam, enabling “can” bending. The machine is also equipped with stronger cylinders for the bending beam than the LYNX bending machine.
SPECIFICATION
| working field | 2300 mm |
| length | 2610 mm |
| width | 800 mm |
| height | 1168 mm |
| weight | 249 kg |
| bending angle | 170° |
| clearance | 100 mm |
| bending element | 15 mm |
MAXIMUM BENDING THICKNESSES
| steel | 1.2 mm |
| aluminum | 1.5 mm |
| stainless | 0.5 mm |
| copper | 1.5 mm |
HEAVY MANUAL BENDING MACHINE M–BH1
EFFICIENT SELF-LUBRICATING SYSTEM ENSURES HIGH MACHINE LIFE, LOW COEFFICIENT OF FRICTION AND MAXIMUM DAMPING OF VIBRATIONS
(A)
bending
(01)
OPENING AND CLOSING HANDLE
...upper beam. Thanks to it, the one-man operation of the machine is possible – and in any place
(02)
Holding magnets
They stabilise the sheets during measuring, thereby enabling independent work. They are very durable (neodymium). They are placed below the guide surface of the sheet – they do not touch it.
(03)
CLEARANCE ENABLING BENDING THE SHEET IN A BOX
It allows you to bend a plate when its side (or several sides) is already bent - the option of bending in four planes.
(03)
PROTRACTOR
It allows you to monitor the bending angle of the sheet. It is precise and placed in a clearly visible place. It shows great resistance to the external conditions and abrasion.
(04)
HEIGHT ADJUSTMENT
It helps to create a comfortable workplace – the height of the machine can be adjusted to the operator’s needs (adjustable up to 12 cm).
(05)
REAR PLATE WITH GRADUATION
Large (up to 10 sheets of metal), stable, easy to assemble and disassemble. Equipped with wooden slats ensuring the safety of the material as well as bumpers with grids allowing for serial cutting and bending.
(06)
PRESSURE ADJUSTMENT SYSTEM
This gives the possibility of adjusting the clamping force to the thickness of the compressed sheet.
(B)
cutting
(01)
CIRCULAR KNIFE
Equipped with a lower disc cover, thanks to which the disc does not chip and the sheet does not bend or get dirty. Durable metal bearings with a double-sided lock prevent the knife from falling out. Its handles are secured with a rubber tip.
(01-A)
BEARING HOUSING
(01-B)
LOWER DISC COVER
(01-C)
ERGONOMIC KNIFE HANDLE
(01-D)
DISTANCE OF THE KNIFE FROM THE MACHINE
(02)
PLACE TO STORE THE KNIFE
It prevents excessive wear of the bearings and cutting wheels (the cutting knife does not come into contact with the sand). It facilitates the work of the operator who can have a knife always at hand.
(03)
FRONT BUMPERS
Their design ensures that the cutting width of the sheet is kept constant and allows for the flexibility of its movements (there is no risk of corrugation).
(04)
DROP RAIL
It prevents cut sheet strips from falling onto the platform and protects the operator’s legs.
(C)
transport
(01)
MOUNTING BRACKETS
...for transport belts. Provide the machine with safe and stable transport by vehicle. Designed from the ground up to protect its calibration and precision.
(02)
CARRYING HANDLES
They enable safe and trouble-free handling of the machine in the workplace. They can be dismantled.
(D)
accessories
(01)
BENDING BEAM CYLINDERS
It reduces the weight of the bending beam, which facilitates the operation of the machine and minimises the need to use hand force.
(01)
WHEELS
Large (220 mm/60 mm), noninflatable and yielding, thus durable. They enable fast and safe movement of the bending machine, even indifficult terrain. You can bend them.
(02)
QUADRUPLE LIMITER
It is a guarantee of stability and precision. Thanks to it, you can set four selected, repeatable bending angles.
(03)
FRONT BUMPERS TAPELINE
They eliminate the differences in dimensions between the knife and the machine, showing the real, exact size of the cut.
